| Gunsmith Labor Per Hour |
$95.00 |
|
|
|
|
| Action Work |
|
|
| Action Job (click to view) |
$110.00 |
TSL-1 |
| Convert auto safety to manual |
$105.00 |
GDAS |
| Drill & tap per hole |
$75.00 |
GDT |
| Ejector fitted & timed - per ejector |
$210.00 |
GFITEJ |
| Makes both your ejectors fire at the same time |
|
|
| Beretta EZ lever supplied & installed |
$130.00 |
GBEREZ |
| Benelli EZ lever supplied & installed (NOT Ethos or SBEIII) |
$130.00 |
GBEZ |
| Benelli EZ lever supplied & installed (Ethos and Benelli SBEIII) |
$155.00 |
GETHOSEZ |
| Make New Firing Pin - per firing pin |
$165.00 |
GFP |
| (made from a blank piece of steel) |
|
|
| Inertia Conversion for Inertia Systems |
|
|
| Makes your second barrel ready to fire with a minimum amount of recoil, suitable for firing 410 bore shells. |
|
|
| Most models |
$150.00 |
G36 |
| Beretta DT10, Beretta DT11, Browning 725, and Caesar Guerini models. |
$200.00 |
G37 |
| K-32 adjustable trigger shoe conversion (K-80 style) (click to view) |
$325.00 |
GK32 |
| Perazzi adjustable trigger shoe conversion (includes gold plating) (click to view) |
$425.00 |
GK32P |
| Open Loading Port (click to view) |
$205.95 |
GOPENLP |
| Rejoint action & tighten forearm |
$500.00 |
GRA |
| This is a tightening process where your existing barrels are fitted tighter to your receiver. |
|
|
| Strip & clean (auto or pump) (click to view) |
$105.00 |
GSC |
| Strip & clean (O/U or S/S) (click to view) |
$165.00 |
GSICO |
| Strip & clean (premium shotgun) |
$250.00 |
GSCDP |
| Trigger job (per side) (an O/U or S/S has two triggers) (No trigger work on Browning Cynergy) (Click to view) |
$125.00 |
GTRIG |
|
|
|
| Barrel Work |
|
|
| Back bore (per hole) (Click to View) |
$165.00 |
GBB |
| The inside diameter is opened to a specific size |
|
|
| Barrel fitted to receiver (O/U or S/S) |
$500.00+ |
GBF |
| Bead installed (includes drilling & tapping) |
$75.00 |
GBDS |
| Replace front or mid bead (no drill and tap) |
$35.00 |
GBDS1 |
| Install Hi-Viz Comp Sight (includes sight) |
$105.00 |
HV |
| Bore match |
$120.00 |
BOREM |
| We bore out the smaller barrel to match the inside diameter of the other barrel, so both bores are exactly the same diameter. |
| Carrier Barrel (customer provides barrel) |
$625.00 |
CB |
| The maximum amount of inside barrel material is removed in an effort to make the barrel weigh the same as it did before a sub-gauge tube set is installed. This makes the barrel unable to fire 12 ga. shells. |
| Chamber sleeve (same gauge) each |
$295.00 |
GSLEEVESG |
| A chamber sleeve is inserted then made to the correct size. This is done when a chamber is over sized or damaged. |
| Choke Alterations (per hole) |
$105.00 |
GBORE |
| Modify your existing fixed choke to a more open restriction. |
|
|
| Cut, crown & reinstall bead |
$95.00 |
GC/C |
| Dent or budge removed & lap bore |
$135.00 |
GDL |
| Not all dents or bulges can be removed depending on the location and severity. |
|
|
| Drill & tap per hole |
$75.00 |
GDT |
| Ejector fitted & timed (each) |
$210.00 |
GFITEJ |
| Engine turn (jewelling) |
$150.00 |
GET |
| Gas ports opened on autoloader |
$105.00 |
GOPEN |
| Headspace Rings (per hole) |
$250.00 |
GHR |
| This is done to correct a headspace problem which is usually too deep. |
|
|
| Lengthen chambers to 3” (subject to inspection) (each chamber) |
$105.00 |
G3CHAM |
| Lengthen forcing cone (click to view) |
$105.00 |
LFC |
| The step between the chamber & barrel is removed creating a smooth taper which is then polished. This aids in the reduction in recoil and improves the shot pattern. |
| Polish bore (each) |
$105.00 |
GPOLB |
| Polish chamber (each) |
$105.00 |
GPOLCH |
| Port auto or pump barrel (Click to view) +$50 for Camo or Coated |
$125.00 |
PORT1 |
| Port both barrels (O/U) (Click to view) +5$0 for Camo or Coated |
$195.00 |
PORT2 |
| Quote / estimate / evaluation fee (waived if work is performed) |
$75.00 |
GQ |
| Sling swivel installed (parts not included) |
$135.00 |
SWIV |
| Shoot for point of impact |
$175.00 |
GPAT |
| Makes sure that the point of impact is in line with the sights |
|
|
| Strip & relay ribs |
$895.00 |
GSL |
| Your existing ribs are removed and then soldered back in place. This process includes a reblue. |
| Refinishing |
|
|
| Bluing Polished (Hot Salt) |
|
|
| Blue Complete O/U,S/S (If BBL requires Slow Rust, then +$100) |
$650.00 |
GBLUECG |
| Blue Complete Auto/Pump |
$600.00 |
GBLUEAP |
| Barrel only (O/U or S/S) |
$425.00 |
GBLUE |
| Barrel only (auto or pump) |
$395.00 |
GBLUEABP |
| Action & forearm |
$495.00 |
GBLUEAF |
| Receiver Only (O/U, S/S, Auto, Pump) |
$425.00 |
GBLUER |
| For high polish add |
$175.00+ |
GHP |
| Bluing Satin Bead Blast (Hot Salt) |
|
|
| Barrel only (O/U, S/S, Auto, Pump) |
$350.00 |
GBLUEABB |
| Receiver Only (O/U, S/S, Auto, Pump) |
$350.00 |
GBLUERB |
| Complete (Most O/U, S/S, Auto, Pump) |
$525.00 |
GBLUECGB |
| Brown Damascus Barrel |
$695.00 |
GBROWN |
| Camo or Cerakote |
|
|
| Stock only |
$325.00 |
GCAMO |
| Camo Complete Shotgun (O/U, S/S, auto, or pump) |
$475.00 |
GCAMOC |
| Cerakote Complete Shotgun or Rifle |
$475.00 |
GCERAKOTE |
| Cerakote Barrel Only |
$275.00 |
GCERAKOTEB |
| Case color receiver |
$750.00 |
GCC |
| Electroless nickel receiver |
$750.00 |
GENICKEL |
| French grey |
$795.00 |
GFRGREY |
| Gold plate trigger (each) |
$165.00 |
GTGOLD |
| Parkerizing (most guns) |
$325.00 |
GPARK |
| Rust Blue Barrel (slow rust) |
$525.00 |
GRUSTBB |
| Rust Blue Receiver (slow rust) |
$525.00 |
GRUSTBR |
|
|
|
| Stock Work |
|
|
| Adjustable comb installed (most guns) |
$425.00 |
GAC |
| Stock Bending |
$150.00 |
GBEND |
| Adjustable recoil pad plate (most guns and includes Kick Eez pad) |
$400.00 |
|
| Graco 575 Adjustable LOP Plate |
|
GGRACO575 |
| Jones Adjustable Butt Plate |
|
GJONES |
| Pad installation (includes pad) (Click to view before and after) |
|
|
| Kickeez (black) or Pachmayr (black or brown) |
$150.00 |
GPAD |
| Leather |
$475.00 |
GPADL |
| Install Customer Supplied Pad |
$115.00 |
GPADCS |
| Spacers (each) |
$20.00 |
GSPACE |
| Recoil Systems |
|
|
| GRACO Gracoil GC15S |
$595.00 |
GGRACO |
| GRACO Gracoil GC15LP (Adjustable Length of Pull) |
$650.00 |
GGRACOGC15LP |
| Install ISIS Recoil Syetem |
$650.00 |
GISIS |
| Wood Refinishing & repairing |
POR |
GWOOD |